Ford F150

Difetto: INCORRECTLY INSTALLED FUEL LINE CONNECTORS HAVE FUEL SUPPLY AND RETURN LINES CROSSED.

Rischio: FUEL COULD BE TRANSFERRED FROM ONE TANK TO THE OTHER,POSSIBLY RESULTING IN FUEL OVERFLOW AND SPILLAGE, IN PRESENCE OF AN IGNITIONSOURCE, A FIRE COULD OCCUR.

Rimedio del costruttore: REPLACE FUEL LINE ASSEMBLY.

Difetto: FRONT INNER WHEEL BEARINGS MAY NOT HAVE BEEN LUBRICATED ADEQUATELY AT TIME OF ASSEMBLY.

Rischio: IF THIS CONDITION WERE TO OCCUR, FRICTION WILL CAUSEPREMATURE DETERIORATION OF THE WHEEL BEARINGS AND STEERING CONTROL COULD BEAFFECTED ADVERSELY.

Rimedio del costruttore: INSPECT AND REPLACE ANY BEARING OR RACE SHOWING SIGNS OF GALLING OR HEAT SPOTS.

Difetto: A NUMBER OF WHEEL ASSEMBLIES ON THE INVOLVED VEHICLES MAY HAVE SUBSTANDARD WELDS IN THE AREA WHERE THE DISC IS ATTACHED TO THE RIM. SUBSTANDARD WELDS CAN CAUSE CRACKS TO OCCUR IN THE WHEEL ASSEMBLY. RAPID LOSS OF AIR PRESSURE IN THE TIRE OR SEPARATION OF THE WHEEL RIM FROM THE DISC COULD RESULT.

Rimedio del costruttore: IF SEPARATION AND LOSS OF AIR OCCURS WHILE VEHICLE IS IN OPERATION, LOSS OF VEHICLE CONTROL AND AN ACCIDENT COULD OCCUR WITHOUT PRIOR WARNING. CORRECTIVE ACTION: THE DEALER WILL INSPECT AND, IF NECESSARY, REPLACE THE WHEELS WITHOUT CHARGE TO OWNER.

Difetto: THE DRIVER"S SIDE SHOULDER BELT RETRACTOR MOUNTING BRACKET ASSEMBLY CONTAINS A WELD NUT WHICH WAS IMPROPERLY ATTACHED TO THE BRACKET. THIS FAILS TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES".

Rimedio del costruttore: THE DEALER WILL REPAIR THE LEFT SIDE SHOULDER BELT RETRACTOR MOUNTING BRACKET ON THE INVOLVED VEHICLES FREE OF CHARGE.

Difetto: THESE VEHICLES MAY BE EQUIPPED WITH STEERING LINKAGES ON WHICH COTTER PINS MAY NOT HAVE BEEN INSTALLED ON CASTELLATED NUTS TO SECURE THE STEERING DRAG LINK AND TIE-ROD CONNECTIONS. ALSO, THESE ATTACHING NUTS MAY NOT HAVE BEEN TIGHTENED TO SPECIFICATIONS. THIS COULD ALLOW LINKAGE SEPARATION.

Rimedio del costruttore: THE DEALER WILL PERFORM NECESSARY CORRECTIONS TO THE STEERING LINKAGE ATTACHMENTS.

Difetto: SOME OF THESE VEHICLES MAY BE EQUIPPED WITH AUTOMATIC TRANSMISSIONS THAT WERE ASSEMBLED WITH IMPROPERLY MANUFACTURED CAST IRON EXTENSION HOUSINGS. THE HOUSINGS HAVE MISLOCATED CAST CAM PLATE STOPS. A MISLOCATED STOP MAY PREVENT THE TRANSMISSION FROM LOCKING IN THE PARK POSITION WHEN THE GEAR SHIFT SELECTOR LEVER IS PLACED IN THE "P" (PARK) POSITION. IF THIS OCCURS A DRIVER MAY RELY UPON THE READING ON THE GEARSHIFT SELECTOR LEVER INDICATOR AND MAY ASSUME THAT THE TRANSMISSION PARKING GEAR IS ENGAGED.

Rimedio del costruttore: DEALER WILL INSPECT AND, IF NECESSARY, REPLACE THE TRANSMISSION EXTENSION HOUSING WITHOUT CHARGE TO OWNER.

Difetto: THE PITMAN ARM TO STEERING GEAR ATTACHMENT NUTS MAY NOT HAVE BEEN PROPERLY TIGHTENED ON THE INVOLVED VEHICLES. THE NUT COULD COME OFF DURING VEHICLE OPERATION.

Rimedio del costruttore: DEALER WILL TIGHTEN THE PITMAN ARM ATTACHING NUT TO THE CORRECT SPECIFICATIONS WITHOUT CHARGE TO OWNER.