DTC code
P2565
Turbocharger Boost Control Position Sensor A Circuit High
Technical guide
reference — not individually verifiedSymptoms
- Charge status indicator shows fault
- Charging may not start or interrupts
- Slower-than-expected charge rate
Probable causes
- high: Signal wire shorted to reference voltage
- medium: Open signal return
- low: Connector pins corroded - high contact resistance
Diagnostic steps
Check the components involved: turbo actuator position sensor a, sensor wiring. Verify wiring and connectors before replacing any part. Job difficulty: medium (workshop equipment required). Typical European range — 200-1200 EUR, 0.6-2.5 h. Reference values only.
Cross-checked technical synthesis (QA). It does not replace the manufacturer's procedure.
AI here is a librarian: this page shows only what mechanics confirmed, or says “unknown”. It never suggests a diagnosis — MECCANIC interprets the code, never your car.
0 confirmed cases on P2565
Nothing confirmed yet for this code. No guess is offered on purpose.
Open a case