Toyota Corolla

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2026 Corolla vehicles. The front headlights may have missing headlight aim markings, which can result in improperly aimed headlights during service. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: Incorrectly aimed headlights can reduce driver visibility or create a glare for oncoming traffic, increasing the risk of a crash.

Manufacturer fix: Dealers will replace both front headlight assemblies, free of charge. Owner notification letters were mailed April 20, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 26TA05.

Defect: Gulf States Toyota, Inc. (GST) is recalling certain Toyota 2023 GR Supra, 2024 4 Runner, Corolla, Grand Highlander, Grand Highlander Hybrid, Land Cruiser Hybrid, Tacoma, Tacoma Hybrid, 2023-2024 BZ4X, Corolla Cross Hybrid, GR Corolla, GR86, Highlander, Highlander Hybrid, Prius, Prius Prime, Sequoia Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, 2023-2025 Crown, and 2025 Camry Hybrid vehicles equipped with GST accessories. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.

Manufacturer fix: GST will mail new labels to owners, free of charge. Owner notification letters were mailed September 16, 2024. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 24R2.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Corolla and Corolla Hybrid vehicles. Due to cracks developed during the manufacturing process, the steering intermediate shaft assembly may fracture and possibly result in the shaft detaching from the steering column.

Risk: A steering shaft that detaches can result in a loss of steering control, increasing the risk of a crash.

Manufacturer fix: Dealers will replace the intermediate steering shaft, free of charge. Owner notification letters were mailed January 17, 2025. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 24TB13/24TA13.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Corolla, Corolla Cross, Corolla Cross Hybrid, Highlander, Highlander Hybrid, Tacoma, 2023 Lexus RX350, RX350 Hybrid, RX500 Hybrid, 2023-2024 Lexus NX250, NX350, and NX350 Hybrid vehicles. An electrical connection inside the steering column's spiral cable assembly may be insufficiently welded, causing the connection to separate and deactivate the driver's air bag. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

Risk: A deactivated driver's air bag that does not deploy as intended increases the risk of injury during a crash.

Manufacturer fix: Dealers will inspect and replace the spiral cable assembly, if necessary, free of charge. Owner notification letters were mailed September 8, 2023. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TA08. Lexus' number for this recall is 23LA02.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Toyota Corolla, Corolla Cross, Corolla Cross Hybrid, Highlander, Highlander Hybrid, Tacoma, Lexus RX350, 2023-2024 NX250, and NX350 vehicles that may have been incorrectly repaired under previous NHTSA recall number 23V-480. An electrical connection inside the steering column's spiral cable assembly may be insufficiently welded, causing the connection to separate and deactivate the driver's air bag. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

Risk: A deactivated driver's air bag will not deploy as intended, increasing the risk of injury during a crash.

Manufacturer fix: Dealers will inspect and replace the spiral cable assembly as necessary, free of charge. Owner notification letters were mailed March 17, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 25TA02. Lexus' number for this recall is 25LA02.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019 Toyota Corolla hatchback vehicles equipped with Continuously Variable Transmissions (CVT). The pump impeller blades within the torque converter may detach, especially when driven under high load, potentially causing a vehicle stall.

Risk: A vehicle stall, especially when driving a high rate of speed, can increase the risk of a crash.

Manufacturer fix: Toyota has notified owners, and dealers will replace the CVT and torque converter, free of charge. The recall began April 22, 2019. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J17/J07.

Defect: Toyota Motor Engineering & manufacturing North America, Inc. (Toyota) is recalling certain model year 2013-2014 Camry and Camry HV, model year 2013 Avalon and Avalon HV and model year 2014 Corolla vehicles. In the affected vehicles, the windshield wiper switch assembly may short circuit. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard, No. 104, "Windshield Wiping and Washing Systems."

Risk: A short circuit could cause inoperative windshield wipers, reducing driver visibility and increasing the risk of a crash.

Manufacturer fix: Toyota will notify owners, and dealers will replace the wiper switch assembly, free of charge. The recall began on November 8, 2013. Owners may contact Toyota at 1-800-331-4331.

Defect: TOYOTA IS RECALLING CERTAIN MODEL YEAR 2010 COROLLA VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION." THE AIR BAG LABEL INSTALLED ON THE DRIVER SIDE SUN VISOR CAN SEPARATE FROM THE SURFACE OF THE VISOR.

Risk: THIS DOES NOT MEET THE STANDARD REQUIREMENTS.

Manufacturer fix: DEALERS WILL INSPECT THE LABEL AND EXCHANGE THE DRIVER'S SIDE SUN VISOR FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 3, 2009. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.

Defect: SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2010-2011 COROLLA VEHICLES EQUIPPED WITH A NON-TOYOTA, BLUE TOOTH HANDS FREE DEVICE OR NAVIGATION UNIT AND CERTAIN MODEL YEAR 2011 TOYOTA SIENNA VEHICLES EQUIPPED WITH A NON-TOYOTA, OVERHEAD ENTERTAINMENT SYSTEM AND/OR BLUETOOTH HANDS FREE DEVICE. THERE IS A POSSIBILITY THAT THE FRONT A-PILLAR TRIM PANEL RETENTION CLIP MAY HAVE BEEN DAMAGED DURING THE INSTALLATION OF THE AFTERMARKET ACCESSORY.

Risk: A DAMAGED A-PILLAR TRIM PANEL RETENTION CLIP MAY ALLOW THE TRIM PANEL TO COME LOOSE AND INJURE AN OCCUPANT IN THE EVENT OF A CRASH.

Manufacturer fix: DEALERS WILL INSPECT THE A-PILLAR TRIM PANEL RETENTION CLIP AND REPLACE IT IF NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 30, 2011. OWNERS MAY CONTACT SOUTHEAST TOYOTA AT 1-800-301-6859.

Defect: ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH FACTORY ALUMINUM ALLOY WHEELS, THE LUG NUT(S) MAY NOT SECURE THE WHEEL PROPERLY TO THE HUB ASSEMBLY DUE TO OVER-DRILLING OF ONE OR MORE OF THE FIVE LUG NUT HOLES ON THE ALLOY WHEEL. IF THE VEHICLE IS DRIVEN FOR AN EXTENDED PERIOD IN THIS CONDITION, THE LUG NUT(S) COULD POTENTIALLY LOOSEN.

Risk: IN THE WORST CASE, THE STUD BOLT(S) MAY FRACTURE, WHICH MAY RESULT IN THE SEPARATION OF THE WHEEL FROM THE HUB ASSEMBLY AND LEAD TO A LOSS OF VEHICLE CONTROL.

Manufacturer fix: DEALERS WILL INSPECT ALL FOUR FACTORY ALUMINUM ALLOY WHEELS AND, IF NECESSARY, REPLACE ANY FOUND TO BE OUT OF SPECIFICATIONS. OWNER NOTIFICATION BEGAN OCTOBER 27, 2003. OWNERS SHOULD CONTACT TOYOTA AT 1-800-331-4331.

Defect: ON PASSENGER VEHICLES WITH VEHICLE IDENTIFICATION NUMBERS (VIN) STARTING WITH 1NX ONLY AND BUILT FROM JANUARY 8 THROUGH FEBRUARY 13, 2002, IT IS POSSIBLE FOR THE BOLTS THAT JOIN THE REAR BRAKE AND HUB ASSEMBLY TO THE REAR AXLE CARRIER TO BE LOOSE DUE TO INSUFFICIENT TIGHTENING DURING THE ASSEMBLY PROCESS.

Risk: IF THE VEHICLE IS OPERATED IN THIS CONDITION, ONE OR MORE OF THE FOUR BOLTS COULD COME LOOSE, CAUSING AN ABNORMAL NOISE FROM THE REAR AXLE AREA. IN THE EVENT THAT ALL FOUR BOLTS LOOSEN COMPLETELY, SEPARATION OF THE REAR BRAKE AND HUB ASSEMBLY FROM THE REAR AXLE CARRIER COULD OCCUR, WHICH COULD LEAD TO A LOSS OF VEHICLE CONTROL.

Manufacturer fix: DEALERS WILL PROPERLY TIGHTEN THE BOLTS. OWNER NOTIFICATION BEGAN MARCH 21, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT TOYOTA AT 1-800-331-4331.

Defect: IF THE AIR BAG COMPUTER IN A SUBJECT VEHICLE EXPERIENCES A MECHANICAL SHOCK (I.E., RAPIDLY MOVING THE FRONT SEAT BACK AGAINST THE STOPS OR A SUDDEN RELEASE OF THE PARKING BRAKE) WITHIN A VERY SHORT TIME AFTER THE ENGINE IS STARTED, THE AIR BAG CAN DEPLOY INADVERTENTLY.

Risk: UNEXPECTED AIR BAG DEPLOYMENT CAN RESULT IN OCCUPANT INJURY.

Manufacturer fix: DEALERS WILL REPAIR THE AIR BAG COMPUTER.

Defect: THESE CRUISE CONTROL SYSTEMS FAIL TO HOLD THE SPEED SET BY THE DRIVER AND CAN ACCELERATE ABOVE THE INTENDED SET SPEED.

Risk: UNINTENDED ACCELERATION CAN INCREASE THE POTENTIAL FOR A VEHICLE ACCIDENT.

Manufacturer fix: DEALERS WILL REPLACE THESE CRUISE CONTROL ASSEMBLIES.

Defect: IF LIQUID IS SPILLED IN THE CONSOLE BOX AREA, THE AIR BAG WARNING LIGHT CAN ILLUMINATE AND STAY "ON" DURING NORMAL DRIVING CONDITIONS.

Risk: THIS LEAKAGE CONDITION COULD CAUSE THE AIR BAG TO INADVERTENTLY DEPLOY.

Manufacturer fix: DEALERS WILL INSTALL A PROTECTIVE COVER OVER THE AIR BAG SENSOR TO PREVENT POSSIBLE MALFUNCTION CAUSED BY THE SPILLING OF LIQUID SUBSTANCES ON THE SENSOR. AIR BAG SENSORS DAMAGED BY PREVIOUS LIQUID SPILLAGE WILL BE REPLACED.

Defect: THE ANCHOR STRAPS INSTALLED IN THE BELT ASSEMBLIES (FRONT INNER, LEFT AND RIGHT HAND SIDES) WERE IMPROPERLY HEAT TREATED AND CAN BREAK, WHICH WILL NOT SUFFICIENTLY RESTRAIN SEAT OCCUPANTS IN THE EVENT OF A SUDDEN STOP OR ACCIDENT. THIS DOES NOT COMPLY WITH FMVSS NO. 209, "SEAT BELT ASSEMBLIES."

Manufacturer fix: THE MANUFACTURER WILL PROVIDE REPLACEMENT SAFETY BELT ANCHOR STRAPS.

Defect: AN UNUSED HARNESS CONNECTOR FOR POWER WINDOWS, POWER DOOR LOCKS AND SUNROOF WAS IMPROPERLY ROUTED UNDER THE FLOOR CARPET IN THE LEFT KICK PANEL. IF THE VEHICLE IS OPERATED IN COLD WEATHER CONDITIONS WHERE LARGE AMOUNTS OF ROAD SALTS ARE USED, THE SALT WATER OR SNOW CARRIED INTO THE VEHICLE BY THE DRIVER'S SHOES CAN PENETRATE THE CARPET AND DRIP ONTO THE CONNECTOR RESULTING IN THE FORMATION OF A SALT BRIDGE BETWEEN THE TERMINALS.

Risk: THIS CAUSES AN ELECTRICAL SHORT INSIDE THE HARNESS, AND CAN RESULT IN A VEHICLE FIRE.

Manufacturer fix: DEALERS WILL REMOVE THE UNUSED HARNESS CONNECTOR.

Defect: DUE TO A COMPUTER PROGRAM ERROR, CERTAIN DIGITS OF THE GVWR AND THE GAWR APPEARED IN INCORRECT LOCATIONS ON THE CERTIFICATION LABEL LOCATED ON THE LEFT FRONT DOOR OF THE SUBJECT VEHICLES.

Risk: THE CERTIFICATION LABEL WOULD NOT COMPLY WITH THESTANDARDS OF 49 CFR PART 576.

Manufacturer fix: RETURN THE VEHICLE TO THE TOYOTA DEALER FOR EXCHANGE OF THE CERTIFICATION LABEL.

Defect: VOLTAGE REGULATOR WHICH CONTROLS THE AMOUNT OF FLOW IN THE ELECTRICAL SYSTEM BETWEEN THE BATTERY AND THE ALTERNATOR, MAY HAVE MANUFACTURING ERRORS IN AN INTEGRATED CIRCUIT. THE REGULATOR MAY OVERCHARGE THE BATTERY.

Manufacturer fix: DEALER WILL REPLACE THE VOLTAGE REGULATOR AT NO CHARGE.

Defect: CRUISE CONTROL COMPUTER MALFUNCTION COULD OCCUR UPON SHUTTING OFF THE CONTROL AFTER CONTINUOUS USE FOLLOWED BY COLD AMBIENT TEMPERATURES.

Risk: THERMAL SHOCK TO THE CRUISE CONTROL COMPUTER COULD RESULT IN ENGINE RACING IF THE ENGINE IS RESTARTED WITH THE MAIN CONTROL SWITCH IN THE 'ON' POSITION. THIS COULD CAUSE LOSS OF CONTROL AND AN ACCIDENT IF THIS IS PERFORMED IN NORMAL TRAFFIC CONDITIONS.

Manufacturer fix: REPLACE COMPUTER WITH ONE OF IMPROVED DESIGN.

Defect: THE LOCK NUT MAY NOT HAVE BEEN TIGHTENED ENOUGH ON THE STEERING GEAR BOX WORM GEAR BEARING AND ADJUSTER. CONSEQUENTLY, THE WORM GEAR ADJUSTER MAY BECOME LOOSE DUE TO EXCESSIVE PRESSURE FROM HARD REPEATED STEERING.

Manufacturer fix: DEALER WILL INSPECT THE STEERING GEAR BOX ON THE INVOLVED VEHICLES AND, IF NECESSARY, SECURE THE STEERING GEAR BOX WORM GEAR BEARING AND ADJUSTER TO PREVENT STEERING INSTABILITY.