Mitsubishi Montero

Defect: ON CERTAIN SPORT UTILITY VEHICLES, WHEN THE FUEL TANK IS FULL AND THE VEHICLE IS PARKED FACING FORWARD ON AN UPWARD SLOPE, THE FUEL TANK LEVELING VALVE MAY NOT MAINTAIN PROPER SEALING IN THE EVENT THE FUEL EXPANDS FROM A RISE IN THE AMBIENT TEMPERATURE.

Risk: IF THE FUEL LEVELING VALVE DOES NOT SEAL PROPERLY, FUEL MAY LEAK ONTO THE GROUND. FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE MAY RESULT IN A FIRE.

Manufacturer fix: DEALERS WILL REPLACE THE LEVELING VALVE. THE RECALL BEGAN ON AUGUST 30, 2004. OWNERS SHOULD CONTACT MITSUBISHI AT 1-800-222-0037 OR MITSUBISHI CARIBBEAN AT 1-787-251-8715.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. SOME OF THESE VEHICLES ARE EQUIPPED WITH OUTSIDE REARVIEW MIRRORS ON THE PASSENGER SIDE WHICH DO NOT COMPLY WITH THE REQUIREMENTS OF FMVSS 111, "REARVIEW MIRRORS."

Risk: THIS LIMITS THE DRIVER'S FIELD OF VISION ON THAT SIDE OF THE VEHICLE.

Manufacturer fix: DEALERS WILL REPLACE THE REARVIEW MIRROR.

Defect: VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE ACCUMULATOR THAT IS INSTALLED ON THE HYDRAULIC BRAKE BOOSTER MAY HAVE BEEN IMPROPERLY MANUFACTURED. OVER A PERIOD OF TIME, THIS COULD RESULT IN LEAKAGE OF THE PRESSURIZED NITROGEN GAS FROM INSIDE THE ACCUMULATOR.

Risk: THE LOSS OF THIS GAS PRESSURE COULD RESULT IN AN ABNORMAL NOISE FROM THE LEFT SIDE OF THE DASH PANEL WHEN THE BRAKES ARE APPLIED, AND POSSIBLY A DELAYED FIRST TIME BRAKE BOOST ASSIST AFTER THE VEHICLE HAS BEEN PARKED FOR A PERIOD OF TIME, WHICH COULD RESULT IN A VEHICLE CRASH.

Manufacturer fix: DEALERS WILL INSTALL AN IMPROVED ACCUMULATOR. OWNER NOTIFICATION MAILING BEGAN OCTOBER 1, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT MITSUBISHI AT 1-800-222-0037.

Defect: Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 1998-2000 Montero vehicles. These vehicles were equipped with Non-Azide Driver air bag Inflators (NADI) and do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.

Risk: In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag may not properly protect the occupant. These scenarios increase the risk of serious injury or death.

Manufacturer fix: MMNA will notify owners, and dealers will replace the air bag inflator, free of charge. The recall began February 25, 2021. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-20-001.

Defect: VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE FRONT BRAKE LINES CAN DEVELOP PIN HOLES DUE TO CHAFFING AGAINST THE EDGE OF THE PASS-THROUGH HOLE IN THE INNER FENDER.

Risk: BRAKE FLUID CAN LEAK RESULTING IN DETERIORATED BRAKING PERFORMANCE AND ILLUMINATION OF THE BRAKE INDICATOR LAMP.

Manufacturer fix: DEALERS WILL INSPECT THE FRONT BRAKE LINES FOR SIGNS OF WEAR AND ROUTING. IF THE LINES ARE NOT CORRECTLY CENTERED IN THE PASS-THROUGH HOLE, THE LINES WILL BE REPOSITIONED BY BENDING SLIGHTLY TO CORRECT. IF THERE IS EVIDENCE OF BRAKE LINE WEAR, THE BRAKE LINE WILL BE REPLACED.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH ACCESSORY CARGO MATS IN THE THIRD-SEAT AND CARGO AREA. THIS CARGO MAT INTERFERES WITH THE LATCHING INTEGRITY OF THE FOLDING THIRD SEATS.

Risk: IN THE EVENT OF A CRASH, AN OCCUPANT OF THE THIRD SEAT MAY NOT BE PROPERLY RESTRAINED AND COULD BE EJECTED FROM THE VEHICLE.

Manufacturer fix: DEALERS WILL INSPECT THE THIRD-SEAT LATCH AND STRIKER. A RECTANGLE WILL BE REMOVED FROM THE CARGO MAT AROUND EACH STRIKER TO PROVIDE ADEQUATE STRIKER CLEARANCE AND PROPER LATCHING.

Defect: UNDER CONDITIONS OF FULL LOCK STEERING AND FULL SUSPENSION TRAVEL, THE LEFT OR RIGHT FRONT WHEEL-SIDE BRAKE HOSE CAN CRACK, RESULTING IN BRAKE FLUID LEAKAGE.

Risk: BRAKE FLUID LEAKAGE WILL CAUSE ILLUMINATION OF THE BRAKE WARNING LAMP AND REDUCTION IN BRAKING EFFECTIVENESS INCREASING THE RISK OF A VEHICLE ACCIDENT.

Manufacturer fix: DEALERS WILL REPLACE THE LEFT AND RIGHT FRONT WHEEL-SIDE BRAKE HOSES WITH REVISED HOSE ASSEMBLIES.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FRONT LOWER BRAKE HOSES CAN DEVELOP A CRACK, CAUSING A LOSS OF BRAKE FLUID.

Risk: THIS COULD RESULT IN IMPAIRED BRAKING ABILITY AND A POSSIBLE CRASH.

Manufacturer fix: DEALERS WILL REPLACE THE LEFT AND RIGHT LOWER BRAKE HOSES.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES: MIRAGE MODEL VEHICLES EQUIPPED WITH 1.5L ENGINES; MONTERO SPORT MODELS EQUIPPED WITH 3.0L ENGINES; AND MONTERO MODELS EQUIPPED WITH 3.0L ENGINES. THE BOLT SECURING THE CRANKSHAFT PULLEY CAN BECOME LOOSE AND THE PULLEY COULD FALL OFF THE VEHICLE.

Risk: THE CONDITION CAN RESULT IN A LOSS OF POWER STEERING ASSIST, INCREASING THE RISK OF A CRASH.

Manufacturer fix: ON THE MIRAGE VEHICLES, THE DEALERS WILL INSTALL A NEW, IMPROVED CRANKSHAFT PULLEY BOLT ON THE OLDER ENGINES. ON NEW ENGINES WHICH ALREADY HAVE THE IMPROVED BOLT, THE DEALER WILL TIGHTEN THE CRANKSHAFT PULLEY BOLT TO THE CORRECT TORQUE SPECIFICATION. ON THE MONTERO MODELS, DEALERS WILL TIGHTEN THE CRANKSHAFT PULLEY BOLT TO THE CORRECT TORQUE SPECIFICATIONS. IF THE BOLT IS DAMAGED, IT WILL BE REPLACED.

Defect: UNDER CONDITIONS OF FULL LOCK STEERING AND FULL SUSPENSION TRAVEL, THE LEFT OR RIGHT FRONT WHEEL-SIDE BRAKE HOSE CAN CRACK, RESULTING IN BRAKE FLUID LEAKAGE.

Risk: BRAKE FLUID LEAKAGE WILL CAUSE ILLUMINATION OF THE BRAKE WARNING LAMP AND REDUCTION IN BRAKING EFFICIENCY INCREASING THE RISK OF A VEHICLE ACCIDENT.

Manufacturer fix: DEALERS WILL REPLACE THE LEFT AND RIGHT FRONT WHEEL-SIDE BRAKE HOSES WITH REVISED HOSE ASSEMBLIES.

Defect: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

Risk: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.

Manufacturer fix: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.

Defect: THE ENGINES ARE SUBJECT TO THROTTLE VALVE ICING UNDER CERTAIN CONDITIONS.

Risk: THIS MAY CAUSE THE THROTTLE VALVE TO STICK AND NOT ALLOWTHE ENGINE RPM TO RETURN TO IDLE WHICH COULD CAUSE AN ACCIDENT.

Manufacturer fix: INSTALL A HEATED ADAPTER PLATE.

Defect: OIL PRESSURE GAUGE SENDING UNIT, LOCATED ON THE RIGHT HAND SIDE OF THE ENGINE, MAY LEAK OIL. ENGINE PARTS COULD BE DAMAGED DUE TO RESULTING LACK OF LUBRICATION.

Manufacturer fix: UPON INSPECTION, A MODIFIED OIL PRESSURE GAUGE SENDING UNIT WILL BE INSTALLED IF NECESSARY.