Ford Taurus

Defect: Ford Motor Company (Ford) is recalling certain 2017-2018 Ford Taurus vehicles equipped with mechanical key ignition systems. The keys for these vehicles may be able to be removed from the ignition when transmission is not in the PARK position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection."

Risk: If the key is removed from the ignition while the vehicle is not in the PARK position and the parking brake is not applied, the vehicle may roll away, increasing the risk of a crash.

Manufacturer fix: Ford will notify owners, and dealers will replace the shifter assembly, free of charge. The recall began May 11, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18C02.

Defect: Ford Motor Company (Ford) is recalling certain 2016-2019 Taurus vehicles. The driver and front passenger B-Pillar door trim may detach while driving.

Risk: Door trim that detaches while driving can create a road hazard, increasing the risk of a crash.

Manufacturer fix: Dealers will repair or replace the B-pillar trim as necessary, free of charge. Owner notification letters were mailed February 20, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S91.

Defect: Ford Motor Company (Ford) is recalling certain model year 2015 Ford Taurus, Lincoln MKS, and 2016 Ford Explorer vehicles manufactured on July 24, 2015. During vehicle production, the fuel tank attachment bolts may not have been properly tightened. As a result, the fuel tank straps may fracture and the fuel tank could separate from the vehicle.

Risk: If the fuel tank separates from the vehicle, a fuel leak may occur, increasing the risk of a fire.

Manufacturer fix: Ford will notify owners, and dealers will tighten the fuel tank attachment bolts, as necessary, free of charge. The recall began on October 19, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S26.

Defect: Ford Motor Company (Ford) is recalling certain model year 2010-2014 Taurus vehicles manufactured November 24, 2008, through February 28, 2014, originally sold in, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. When used in areas that use road salt, the license plate lamp assembly may experience an electro-chemical reaction and corrosion as a result of water intrusion.

Risk: This corrosion may result in a short circuit, increasing the risk of a fire.

Manufacturer fix: Ford will notify owners, and dealers will replace the license plate lamp assemblies, free of charge. The recall began on July 26, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S08. Note: Under program 14R01, Ford will notify owners in non-corrosion states, and, at the customer's request, dealers will replace the license plate lamp assembly.

Defect: Ford Motor Company (Ford) is recalling certain model year 2010-2013 Ford Taurus vehicles manufactured December 1, 2009, to July 31, 2010, and 2011-2013 Lincoln MKS vehicles manufactured June 1, 2011, to October 31, 2011. In the affected vehicles, the interior door handle return spring may unseat, resulting in interior door handle that does not return to the fully stowed position after actuation.

Risk: If the interior door handle return spring is unseated, the door may unlatch in the event of a side impact crash, increasing the risk of personal injury.

Manufacturer fix: Ford will notify owners, and dealers will inspect all four of the interior door handles and either repair or replace them, free of charge. The recall began March 23, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S02.

Defect: Ford Motor Company (Ford) is recalling certain model year 2013 Explorer, Explorer Police Utility, Taurus, Taurus Police Interceptor, Flex, Lincoln MKS, and Lincoln MKT vehicles. In the affected vehicles, the fuel delivery module may crack, allowing fuel to leak.

Risk: A fuel leak in the presence of an ignition source may result in a fire.

Manufacturer fix: Ford will notify owners, and dealers will replace the fuel delivery module, free of charge. The recall began on December 21, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 13S04-S1.

Defect: Ford is recalling certain model year 2012 Taurus, Lincoln MKS, and model year 2013 Explorer vehicles manufactured July 19, 2011, through March 15, 2012. In the affected vehicles, the fuel tanks may have a marginally sealed seam in the side of the tank. As a result, the fuel tanks may not provide the expected strength in the event of an impact. The tanks may also leak.

Risk: A fuel leak in the presence of an ignition source may result in a fire.

Manufacturer fix: Ford will notify owners, and dealers will inspect the fuel tanks and replace them as necessary, free of charge. The recall began on May 9, 2013. Ford's recall campaign number is 13S03. Owners may contact Ford Motor Company Customer Relationship Center at 1-866-436-7332.

Defect: Bosch Brake Components LLC (Bosch) is recalling certain aftermarket replacement front brake pads, models Bosch QuietCast BC598 and BP765, Bosch Blue BE598 and BE598H, Prostop PD598 and PD765M, Duralast Gold DG598, Duralast MKD598, Stop Master ST598, UltraStop ULT598, UltraLife MX598 and MX765, BrakeBest MKD765, and Prostop Platinum PGD598. These brake pads, manufactured October 1, 2014, to October 31, 2015 are intended for use on 2001-2007 Ford Taurus, 2001-2005 Mercury Sable, 1995-1999 Ford Taurus SHO, 1995-2002 Lincoln Continental, and 1993-1998 Lincoln Mark VIII vehicles. The brake pad shim may shift out of position causing the shim to contact the brake disc resulting in damage to the disc.

Risk: A damaged or broken brake disc may reduce a vehicle's braking power, increasing the risk of a crash.

Manufacturer fix: Bosch will instruct the owners how to have the affected brake pads replaced, free of charge. The recall began on May 26, 2016. Owners may contact Bosch customer service at 1-888-715-3616.

Defect: CERTAIN PASSENGER VEHICLES BUILT FOR ONE SPECIFIC FLEET CUSTOMER WERE MODIFIED FOR OPTIONAL HANDS-FREE CELLULAR PHONE OPERATING CAPABILITY. TO PROVIDE THIS FUNCTIONALITY, A SPECIAL OVERLAY WIRE HARNESS WAS INSTALLED THAT INADVERTENTLY DID NOT INCLUDE THE CIRCUITS FOR PASSENGER AIR BAG DEACTIVATION INDICATOR (PADI) LAMP FUNCTION. AS A RESULT, THESE VEHICLES DO NOT COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, 'OCCUPANT CRASH PROTECTION.'

Risk: THE PADI LAMP WILL FAIL TO ILLUMINATE AND THE AIR BAG WARNING LAMP IN THE CLUSTER WILL STAY ILLUMINATED.

Manufacturer fix: THE FLEET CUSTOMER WAS NOTIFIED AND ALL VEHICLES HAVE BEEN REPAIRED. THE RECALL BEGAN ON APRIL 28, 2006.

Defect: CERTAIN PASSENGER VEHICLES EQUIPPED WITH POWER ADJUSTABLE SEATS MAY HAVE BEEN INADEQUATELY WELDED.

Risk: THE SEAT MAY NOT PERFORM AS INTENDED DURING A CRASH WHICH COULD INCREASE THE RISK OF INJURY.

Manufacturer fix: DEALERS WILL REPLACE THE UPPER SUPPORT ASSEMBLY ON THE POWER SEATS. THE RECALL BEGAN ON JULY 20, 2004. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.

Defect: ON CERTAIN VEHICLES, THE AIR FILTER PAPER IN THESE VEHICLES CAN SMOLDER OR BURN.

Risk: THIS CAN LEAD TO DAMAGE TO THE AIR INDUCTION SYSTEM ON THESE VEHICLES AND/OR AN UNDERHOOD FIRE.

Manufacturer fix: DEALERS WILL REPLACE THE AIR FILTER ELEMENT. OWNER NOTIFICATION BEGAN ON MARCH 10, 2004. OWNERS SHOULD CONTACT FORD AT 1-800-392-3673.

Defect: CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING." THE WINDSHIELDS MAY POTENTIALLY EXHIBIT INCREASED WIND NOISE, WATER LEAKAGE, AND SQUEAKS AND RATTLES.

Risk: POTENTIAL LOSS OF WINDSHIELD RETENTION MAY ALSO REDUCE OCCUPANT PROTECTION IN THE EVENT OF A CRASH.

Manufacturer fix: DEALERS WILL REPLACE THESE WINDSHIELDS. OWNER NOTIFICATION BEGAN ON MARCH 31, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD/MERCURY AT 1-800-392-3673.

Defect: VEHICLE DESCRIPTION: PASSENGER SEDANS WITH FACTORY OR DEALER-INSTALLED DECK LID SPOILERS WITH LED CENTER HIGH MOUNTED STOP LAMPS (CHMSL). VEHICLES PRODUCED WITH SPOILERS WERE MANUFACTURED FROM MARCH 1 THROUGH OCTOBER 31, 2000; AND VEHICLES WITH SPOILERS INSTALLED BY DEALERS WERE MANUFACTURED FROM JANUARY 1 THOROUGH DECEMBER 30, 2000. WITH THE IGNITION SWITCH IN THE START OR RUN POSITIONS AND THE HAZARD WARNING LIGHTS OPERATING, THE CHMSL CAN ILLUMINATE (AT REDUCED INTENSITY) EVEN THOUGH THE SERVICE BRAKES HAVE NOT BEEN APPLIED. THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." ALSO, IN SOME CASES THE VEHICLE BRAKE-SHIFT INTERLOCK WOULD NOT FUNCTION PROPERLY, ALLOWING THE SHIFT LEVER TO BE MOVED FROM PARK WITHOUT APPLYING THE BRAKE.

Risk: UNDER THE REQUIREMENTS OF THE STANDARD, THE CHMSL SHALL BE ACTIVATED ONLY UPON APPPLICATION OF THE SERVICE BRAKES. ALSO, THE VEHICLE COULD ROLL INCREASING THE RISK OF A CRASH, IF THE SHIFT LEVER CAN BE SHIFTED OUT OF PARK WITHOUT DEPRESSING THE BRAKE PEDAL.

Manufacturer fix: DEALERS WILL INSTALL A JUMPER/RESISTOR ASSEMBLY AT THE SPOILER THAT PROVIDES AN ELECTRICAL RESISTOR TO GROUND AND CORRECTS THE CHMSL AND BRAKE-SHIFT INTERLOCK CONDITIONS. OWNER NOTIFICATION BEGAN MARCH 19, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.

Defect: VEHICLE DESCRIPTION: PASSENGER AND SPORT UTILITY VEHICLES. DUE TO THE USE OF INCORRECT MATERIAL BY A SUPPLIER, THE HEADLAMP SWITCH KNOB CAN FRACTURE AND SEPARATE FROM THE HEADLAMP SWITCH.

Risk: THIS WOULD CAUSE DIFFICULTY FOR THE DRIVER TO ACTIVATE THE HEADLAMPS, WHICH COULD AFFECT DRIVER VISIBILITY, INCREASING THE RISK OF A CRASH.

Manufacturer fix: DEALERS WILL REPLACE THE HEADLAMP SWITCH KNOB. OWNER NOTIFICATION BEGAN APRIL 9, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT FORD AT 1-800-392-3673.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH MANUAL SEAT TRACKS. THE FRONT SEAT BELT BUCKLE ATTACHING STUD MAY HAVE BEEN IMPROPERLY HEAT TREATED. THIS HEAT TREATMENT MAY HAVE RESULTED IN CRACKS DEVELOPING IN THE STUD.

Risk: IF THE STUD IS CRACKED, IN THE EVENT OF A VEHICLE CRASH, THE OCCUPANT MAY NOT BE PROPERLY RESTRAINED, INCREASING THE RISK OF PERSONAL INJURY.

Manufacturer fix: DEALERS WILL REPLACE THE SEAT BELT BUCKLE MOUNTING BRACKET AND STUD ASSEMBLY.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUPPED WITH THE "CALIFORNIA" EMISSIONS PACKAGE. AN INCORRECT TRANSMISSION OIL COOLER LINE WAS INSTALLED. THE LINE CONTACTS THE ANTI-LOCK BRAKING SYSTEM MODULE SUPPORT BRACKET AND OVER TIME, CAN WEAR AND DEVELOP A LEAK.

Risk: TRANSMISSION FLUID LEAKAGE ONTO THE EXHAUST MANIFOLD OR CATALYTIC CONVERTER CAN RESULT IN A FIRE.

Manufacturer fix: DEALERS WILL INSTALL THE APPROPRIATE TRANSMISSION OIL COOLER LINE.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH AX4S AUTOMATIC TRANSAXLES. THE LOW/INTERMEDIATE SERVO COVER CAN SEPARATE FROM THE TRANSAXLE WHILE THE VEHICLE IS BEING DRIVEN. IF THIS OCCURS, TRANSMISSION FLUID WILL LEAK CONTACTING THE CATALYTIC CONVERTER.

Risk: THE CATALYTIC CONVERTER TEMPERATURE MAY BE HOT ENOUGH TO IGNITE THE TRANSMISSION FLUID AND CAUSE A VEHICLE FIRE.

Manufacturer fix: DEALERS WILL INSPECT THE TRANSMISSION AND REPLACE THESE SERVO COVERS.

Defect: THE FUEL PRESSURE REGULATOR LOCATED ON THE FUEL RAIL IN THE ENGINE COMPARTMENT HAS A VACUUM DIAPHRAGM THAT WAS DAMAGED DURING MANUFACTURE OF THE REGULATOR.

Risk: IF THE DIAPHRAGM TEARS OR RUPTURES, LIQUID FUEL COULD ENTER THE INTAKE MANIFOLD PLENUM THROUGH THE VACUUM LINE RESULTING IN EITHER RELEASE OF FUEL FROM THE AIR CLEANER ASSEMBLY OR THE EXHAUST SYSTEM. FUEL RELEASE IN THE PRESENCE OF AN IGNITION SOURCE COULD POTENTIALLY RESULT IN A FIRE.

Manufacturer fix: DEALERS WILL INSPECT THE FUEL PRESSURE REGULATOR. THOSE REGULATORS PRODUCED DURING THE SUSPECT TIME PERIOD WILL BE REPLACED.

Defect: THE PARK PAWL ABUTMENT BRACKET HAS A SHARP EDGE WHICH CAN CAUSE THE PARKING PAWL TO HANG UP AND NOT ENGAGE THE PARK GEAR. THIS WOULD ALLOW THE VEHICLE TO MOVE EVEN THOUGH THE GEAR SHIFT INDICATOR SHOWS THAT THE VEHICLE IS IN PARK.

Risk: UNINTENDED AND UNEXPECTED VEHICLE MOVEMENT CAN RESULT IN PERSONAL INJURY AND PROPERTY DAMAGE.

Manufacturer fix: DEALERS WILL INSPECT AND, IF NECESSARY, REPLACE THE PARK PAWL ABUTMENT BRACKET.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE STATES OF NEW YORK, MICHIGAN, OHIO, ILLINOIS, WISCONSIN, PENNSYLVANIA, MASSACHUSETTS, INDIANA, NEW JERSEY, MAINE, CONNECTICUT, NEW HAMPSHIRE, RHODE ISLAND, VERMONT, MINNESOTA, IOWA, MISSOURI, KENTUCKY, MARYLAND, DELAWARE, AND WEST VIRGINIA. THE FRONT COIL SPRINGS CAN FRACTURE AS A RESULT OF CORROSION IN COMBINATION WITH SMALL CRACKS IN THE SPRINGS.

Risk: THE FRONT TIRE COULD DEFLATE DUE TO A BROKEN FRONT COIL SPRING CONTACTING THE TIRE, INCREASING THE RISK OF A VEHICLE CRASH.

Manufacturer fix: DEALERS WILL INSTALL A SPRING CATCHER BRACKET WHICH WILL PREVENT A FRACTURED SPRING FROM CONTACTING A TIRE.

Defect: ANTI-LOCK BRAKE SYSTEM CONTROLLERS DESIGNED FOR REAR WHEEL DRIVE CARS MAY HAVE BEEN INSTALLED ON THESE FRONT WHEEL DRIVE CARS..

Risk: THIS COULD RESULT IN REDUCED BRAKING ABILITY AND POSSIBLEVEHICLE ACCIDENT.

Manufacturer fix: REPLACE THE REAR WHEEL DRIVE ABS CONTROLLER WITH A FRONT WHEEL DRIVE ABS CONTROLLER.

Defect: THE ARC WELDS ON THE SWAY BAR BRACKET, WHERE IT ATTACHES TO THE STRUT RESERVE TUBE, DID NOT FUSE PROPERLY.

Risk: OVER TIME, A PORTION OF THE BRACKET CAN TEAR AWAY FROM THE STRUT, FALLING INTO AND PUNCTURING THE TIRE OR CAUSING DAMAGE TO THE WHEEL, WHICH COULD RESULT IN AN ACCIDENT.

Manufacturer fix: MONROE DEALERS WILL REPLACE THE STRUT FREE OF CHARGE.

Defect: MANUFACTURING ERRORS BY THE SUPPLIER OF THE LIFTGATE LATCH MECHANISM MAY CAUSE THE SECONDARY PORTION OF THE LIFTGATE LATCH NOT TO FUNCTION. IF THE LATCH IS NOT IN THE PRIMARY LATCH POSITION, THE LIFTGATE COULD OPEN WITHOUT OPERATOR ACTION.

Risk: IF THE LIFTGATE WERE TO OPEN DURING VEHCILE OPERATION,PASSENGERS OR CARGO COULD FALL FROM THE OPEN LIFTGATE.

Manufacturer fix: REPLACE MALFUNCTIONING LIFTGATE LATCHES.

Defect: VEHICLE DESCRIPTION: VEHICLES EQUIPPED WITH 3.8L ENGINES AND ORIGINALLY SOLD OR CURRENTLY REGISTERED IN THE FOLLOWING STATES: ALASKA, COLORADO, IOWA, IDAHO, ILLINOIS, INDIANA, KANSAS, MASSACHUSETTS, MAINE, MICHIGAN, MINNESOTA, MISSOURI, MONTANA, NORTH DAKOTA, NEBRASKA, NEW HAMPSHIRE, NEW YORK, OHIO, PENNSYLVANIA, SOUTH DAKOTA, VERMONT, WISCONSIN, AND WYOMING. WATER CAN ACCUMULATE WITHIN THE SPEED CONTROL CABLE CONDUIT. IF ENOUGH WATER ACCUMULATES, IT COULD FREEZE WITHIN A LOW AREA OF THE CABLE ROUTING WHEN EXPOSED TO A LONG TERM COLD SOAK AT TEMPERATURES AT LEAST SEVERAL DEGREES BELOW FREEZING.

Risk: DRIVER CONTROL OF VEHICLE SPEED USING THE SPEED CONTROL SYSTEM OR THE ACCELERATOR CONTROL SYSTEM WOULD BE DIMINISHED INCREASING THE RISK OF A VEHICLE CRASH.

Manufacturer fix: DEALERS WILL ADD A BOOT TO THE SPEED CONTROL CABLE.

Defect: THREADED INFLATOR COMPONENTS MAY HAVE BEEN DAMAGED DURING ASSEMBLY WHICH MAY ALLOW COMPONENTS TO SEPARATE WHEN INFLATOR RECEIVES A SIGNAL TO DEPLOY THE AIR BAG.

Risk: INFLATOR COMPONENT SEPARATION ALLOWS HOT COMBUSTION GASES TO ESCAPE INTO THE PASSENGER COMPARTMENT WHICH COULD RESULT IN INJURIES TO VEHICLE OCCUPANTS.

Manufacturer fix: REPLACE AIR BAG MODULES CONTAINING POTENTIALLY DEFECTIVE INFLATORS.

Defect: THE RIGID MOUNTED SAFETY BELT BUCKLES ARE DEFECTIVE IN THREE WAYS. FIRST, A FASTENED SAFETY BELT BUCKLE WILL NOT UNLATCH WHEN THE RELEASE BUTTON IS DEPRESSED. THIS RESULTS FROM INTERFERENCE BETWEEN THE BUCKLE EJECTOR FINGER AND THE BUCKLE TONGUE WINDOW. THE SECOND DEFECT IS THE SAFETY BELT BUCKLE MAY NOT LATCH. THE THIRD POSSIBLE DEFECT IS THAT THE TONGUE MAY BE RETAINED BY THE BUCKLE, BUT IT MAY NOT BE LATCHED SUFFICIENTLY TO PROVIDE OCCUPANT PROTECTION.

Risk: AN INSUFFICIENTLY LATCHED OR UNLATCHED SAFETY BELTINCREASES THE RISK OF INJURY TO SEAT OCCUPANTS IN THE EVENT OF A SUDDEN STOP ORACCIDENT. IF THE SAFETY BELT BUCKLE WILL NOT UNLATCH, IT WILL NOT ALLOW THEOCCUPANT TO GET OUT OF THE VEHICLE IN AN EMERGENCY SITUATION.

Manufacturer fix: FORD WILL REPLACE THE RIGID MOUNTED SAFETY BELT BUCKLES WITH END RELEASE SAFETY BELT BUCKLES DESIGNED TO PREVENT LATCH PROBLEMS.

Defect: WHEELS MAY CONTAIN CRACKS THAT COULD PROPOGATE IN RAISED PORTION OF WHEEL CENTER.

Risk: UNDER SEVERE DUTY, THIS COULD RESULT IN EVENTUALSEPARATION OF WHEEL RIM FROM CENTER WITH LOSS OF CONTROL AND POSSIBLY ACOLLISION.

Manufacturer fix: REPLACE WHEELS WITH WHEELS OF A REVISED DESIGN.

Defect: THE POWER SEAT SWITCH WIRING IS ROUTED OVER RATHER THAN UNDER THE FRONT SEAT SUPPORT BRACE, ALLOWING DAMAGE BY SEAT CUSHION SPRING ENDS WHEN SEAT IS OCCUPIED.

Risk: POWER SEAT SWITCH WIRING INSULATION MAY BECOME ABRADED,OR PUNCTURED, AND AN ELECTRICAL SHORT COULD OCCUR THAT COULD RESULT IN A FIREIN THE SEAT CUSHION MATERIAL.

Manufacturer fix: REVISE ROUTING OF POWER SEAT WIRING TO PREVENT DAMAGE FROM SEAT CUSHION SPRING CONTACT.