Toyota Tundra

Defect: Southeast Toyota Distributors, LLC (SET) is recalling one 2026 Tundra truck. The current load carrying capacity modification label is incorrect. As such, this vehicle fails to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: An incorrect load carrying capacity modification label may lead to improper loading of the vehicle, increasing the risk of a crash.

Manufacturer fix: SET will provide the owner with a new load carrying capacity modification label, free of charge. An owner notification letter is expected to be mailed September 4, 2026. The owner may contact SET's customer service at 1-866-405-4226. SET's number for this recall is SET26A.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Sequoia Hybrid, Tundra and Tundra Hybrid vehicles. The passenger-side front and rear tires may have inner sidewall damage, which can cause a sudden loss of tire pressure.

Risk: A sudden loss of tire pressure can result in a loss of vehicle control, increasing the risk of a crash.

Manufacturer fix: Dealers will inspect and replace the tires as necessary, free of charge. Owner notification letters were mailed December 5, 2024. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 24TA12.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Tundra vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause a main bearing to fail, which can result in an engine stall and loss of drive power.

Risk: A loss of drive power increases the risk of a crash.

Manufacturer fix: Dealers will perform an inspection on the #1 main bearing using vehicle inspection software and drive data, and if necessary, replace the engine. Repairs will be performed free of charge. Owner notification letters are expected to be mailed July 6, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB14 and 25TA14. This recall expands previous NHTSA recall numbers 24V381 and 25V767.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

Risk: A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.

Manufacturer fix: Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.

Defect: Southeast Toyota Distributors, LLC (SET) is recalling certain 2022-2024 Toyota Tundra vehicles. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: An overloaded vehicle increases the risk of a crash.

Manufacturer fix: SET will mail a new modified label, free of charge. Owner notification letters were mailed December 18, 2023. Owners may contact SET's customer service at 1-866-405-4226. SET's number for this recall is SET23B.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. A software error in the combination meter's electronic control unit (ECU) may cause the Instrument Panel LCD display to go blank. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."

Risk: A blank display will not show critical information such as the speedometer or warning lights, increasing the risk of a crash.

Manufacturer fix: Dealers will update the combination meter ECU software, free of charge. Owner notification letters are expected to be mailed April 17, 2023. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TA02.

Defect: Gulf States Toyota, Inc. (GST) is recalling certain 2023 Tundra pickup trucks equipped with non-skid spray-on bed liners. The load carrying capacity modification label may indicate less weight than the actual total weight of accessories installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.

Manufacturer fix: GST will mail replacement labels to owners, free of charge. Owner notification letters were mailed January 10, 2023. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 22R2.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles that may be equipped with a Toyota genuine accessory tonneau cover. The tonneau cover attachment joints may come loose and allow the cover to detach.

Risk: A tonneau cover that detaches while driving can become a road hazard, increasing the risk of a crash.

Manufacturer fix: Owners of the subject vehicles will be notified by first class mail to return their vehicles to a Toyota dealer. Dealer will install new hardware (bolts, spacers, washers, nuts, rubber washers and cotter pins) to the existing bracket and tonneau cover. If the tonneau cover has tears or splits at the mounting holes to the extent that new hardware cannot be installed, it will be replaced with a new tonneau cover and hardware. Owners will receive a notice once the remedy becomes available. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TB03/23TA03.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Tundra, Tundra Hybrid, and Sequoia Hybrid vehicles. The steel chain used to secure the spare tire to the underside of the vehicle may have been insufficiently welded.

Risk: Chains that are not welded sufficiently can break and allow the spare tire to detach, increasing the risk of a crash.

Manufacturer fix: Dealers will replace the spare tire carrier assembly, free of charge. Owner notification letters are expected to be mailed August 14, 2023. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TB06/23TA06.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023 Tundra and Tundra Hybrid vehicles equipped with a spray-on bed liner accessory. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: An overloaded vehicle increases the risk of a crash.

Manufacturer fix: Dealers will replace the load carrying capacity modification label, free of charge. Owner notification letters are expected to be mailed October 29, 2023. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TA11.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. A software error in the combination meter's electronic control unit (ECU) may cause the Instrument Panel LCD display to go blank. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."

Risk: A blank display will not show critical information such as the speedometer or warning lights, increasing the risk of a crash.

Manufacturer fix: Dealers will update the combination meter ECU software, free of charge. Owner notification letters are expected to be mailed April 17, 2023. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TA02.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. Incorrect programming of the parking-assist electronic control unit (ECU) software, may cause the front camera image to appear on the multimedia display instead of the rear camera image when the shifter is placed into reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: A rearview camera that fails to display the correct image can reduce the driver's rear view, increasing the risk of a crash.

Manufacturer fix: Dealers will reprogram the parking assist ECU, free of charge. Owner notification letters were mailed July 27, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA07.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra and Tundra Hybrid vehicles. The flange nuts on the axle shaft sub-assemblies can loosen over time and potentially cause one or both axle shaft sub-assemblies to separate from the axle housing.

Risk: Axle shaft separation can cause a loss of vehicle stability and brake performance, increasing the risk of a crash.

Manufacturer fix: Dealers will inspect the rear axle assembly, tighten the axle flange nuts, and replace any damaged axle-related components if necessary, free of charge. Owner notification letters are expected to be mailed July 15, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA05.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Tundra vehicles equipped with a Panoramic View Monitor (PVM) system. The parking assist electronic control unit (ECU) software may prevent transmission of the rearview camera signal during cold weather, preventing the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: A rearview camera that does not display an image reduces the driver's view of what is behind the vehicle, increasing the risk of a crash.

Manufacturer fix: Dealers will reprogram the parking assist ECU software, free of charge. Owner notification letters were mailed June 2, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 22TA04.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Lexus NX250, NX350, and Toyota Tundra vehicles. The Skid Control ECU within the Brake Actuator Assembly may falsely detect an overcurrent condition of the Electronic Parking Brake (EPB) Actuator and enter a failsafe mode which prevents the EPB from being engaged. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."

Risk: An electronic parking brake that cannot be engaged while in "park," may result in a vehicle rollaway, increasing the risk of a crash.

Manufacturer fix: Dealers will reprogram the Skid Control ECU, free of charge. Owner notification letters were mailed November 1, 2022. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 22TA11 and 22LA04.

Defect: Southeast Toyota Distributors, LLC (SET) is recalling certain 2022-2024 Toyota Tundra vehicles. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

Risk: An overloaded vehicle increases the risk of a crash.

Manufacturer fix: SET will mail a new modified label, free of charge. Owner notification letters were mailed December 18, 2023. Owners may contact SET's customer service at 1-866-405-4226. SET's number for this recall is SET23B.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Tundra, Tundra Hybrid, Lexus LX600, and 2023-2024 Sequoia Hybrid vehicles. Unexpected vehicle movement may occur when the vehicle is in neutral and the brakes are not applied.

Risk: Unexpected vehicle movement can increase the risk of a crash.

Manufacturer fix: Dealers will update the transmission control ECU software, free of charge. Owner notification letters were mailed April 8, 2024. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 24TA02 and 24LA02.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.

Risk: Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.

Manufacturer fix: Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

Risk: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.

Manufacturer fix: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Toyota Tundra, Lexus LX, and 2024 Lexus GX vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.

Risk: A loss of drive power increases the risk of a crash.

Manufacturer fix: Dealers will perform an inspection on the #1 main bearing using vehicle inspection software and drive data, and if necessary, replace the engine. Repairs will be performed free of charge. Interim letters notifying owners of the safety risk were mailed December 16, 2025. Additional letters will be sent once the final remedy is available. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB14 and 25TA14. Lexus' numbers for this recall are 25LB07 and 25LA07. This recall expands previous NHTSA recall number 24V381.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Lexus LX600 vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.

Risk: A loss of drive power increases the risk of a crash.

Manufacturer fix: Dealers will replace the engine assembly, free of charge. Owner letters were mailed between December 17, 2024 and February 19, 2025. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 24TB07/24TA07 and 24LB04/24LA04.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles. The plastic fuel tube routed near metallic brake lines may chafe against the brake lines and become damaged, possibly resulting in a fuel leak.

Risk: A fuel leak in the presence of an ignition source can increase the risk of a fire.

Manufacturer fix: Dealers will install protective materials and a clamp on the fuel tube, free of charge. Owner letters were mailed November 6, 2024. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 23TB09/23TA09.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2023 Tundra and Tundra Hybrid vehicles that may be equipped with a Toyota genuine accessory tonneau cover. The tonneau cover attachment joints may come loose and allow the cover to detach.

Risk: A tonneau cover that detaches while driving can become a road hazard, increasing the risk of a crash.

Manufacturer fix: Owners of the subject vehicles will be notified by first class mail to return their vehicles to a Toyota dealer. Dealer will install new hardware (bolts, spacers, washers, nuts, rubber washers and cotter pins) to the existing bracket and tonneau cover. If the tonneau cover has tears or splits at the mounting holes to the extent that new hardware cannot be installed, it will be replaced with a new tonneau cover and hardware. Owners will receive a notice once the remedy becomes available. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 23TB03/23TA03.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2021 Tundra vehicles. The headlight electrical circuits may power the high and low beams simultaneously, which could overheat the electrical connector.

Risk: An overheated electrical connector can increase the risk of a fire.

Manufacturer fix: Dealers will modify the engine wire harness assembly and replace any damaged bulb, bulb connector, and/or headlight assembly as necessary, free of charge. Owner notification letters were mailed April 25, 2022. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 21TB06 and 21TA06.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019 Toyota Tundra standard and long bed trucks equipped with a spray-in bed liner. The load carrying capacity modification label may have been incorrectly calculated. If the label is followed, the vehicle may be overloaded. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

Risk: An overloaded vehicle can increase the risk of a crash.

Manufacturer fix: Toyota has notified owners, and provided corrected load carrying capacity labels, free of charge. The recall began on January 24, 2019. The recall number is J08. Owners may contact Toyota customer service at 1-888-270-9371.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2020 Toyota Tundra vehicles equipped with LED headlight assemblies. Due to a wiring error, the front turn signals may not flash brightly enough. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: If the turn signals or hazard lamps do not flash brightly enough, other drivers may fail to see that the turn signal or hazard lamp functions have been activated, increasing the risk of a crash.

Manufacturer fix: Toyota will notify owners, and dealers will modify the wire harness connected to the front turn signal bulbs free of charge. The recall began August 17, 2020. Owners may contact Toyota customer service at 1-800-270-9371. Toyota's number for this recall is 20TB12/20TA12.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2017-2018 Toyota 4Runner and Tundra, 2018 Toyota Highlander, RAV4 and Lexus GX460 and 2017 Toyota Sienna and Tacoma vehicles. These vehicles may have incorrect load carrying capacity modification labels. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

Risk: An incorrect load information label can result in the operator overloading the vehicle and increasing the risk of a crash.

Manufacturer fix: Toyota will notify owners and provide them with corrected labels, free of charge. The recall began on January 23, 2018. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are H0Z for Toyota vehicles, and HLF for Lexus vehicles.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 Toyota Tundra vehicles. The accessory all-weather floormats may have been counted twice when creating the load carrying capacity modification label, resulting in the capacity modification label incorrectly overstating the additional weight by 10 pounds. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."

Risk: Since the incorrect label is not within 1% of the additional weight, the vehicles are not compliant with the FMVSS.

Manufacturer fix: All vehicle owners will be sent a corrected label. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0Z.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2017 Toyota Tundra vehicles. One of the rear split bench seat leg brackets may not have been properly tightened to the vehicle's floor pan, possibly allowing the seat to move in a crash. A vehicle with an improperly tightened seat leg bracket could fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems," 210, "Seat Belt Assembly Anchorages," and 225, "Child restraint anchorage systems."

Risk: If the rear split bench seat moves in a crash, the seat occupant has an increased risk of injury.

Manufacturer fix: Toyota will notify owners, and dealers will tighten the five seat leg bracket bolts, as necessary, free of charge. The recall is expected to begin March 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0I.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2016 Tundra vehicles. The affected vehicles have a passenger knee air bag module that was attached to the instrument panel mounting brackets with incorrect bolts.

Risk: The incorrect bolts may cause the air bag module to loosen over time, affecting the performance of the knee airbag, increasing the risk of injury during a crash.

Manufacturer fix: All of the affected vehicles have been inspected and any incorrect knee air bag mounting bolts have been replaced, free of charge. The recall began on June 22, 2017. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is H0K.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2016-2017 Tundra vehicles equipped with a resin rear step bumper and resin reinforcement brackets (vehicles with chrome step bumpers are not affected). In the event of an impact to the corner of the bumper, the resin bracket may be damaged but not be noticed.

Risk: If a person steps on the corner of the bumper that is damaged, a portion of the bumper may break away, increasing the risk of injury.

Manufacturer fix: Toyota will notify owners, and dealers will replace the resin rear bumper reinforcement brackets with steel ones, and replace the rear bumper tread, free of charge. The recall began on May 21, 2017. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is H0C.

Defect: Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2015 Toyota Tundra vehicles manufactured March 11, 2015, to April 11, 2015 and equipped with Nitto Terra Grappler G2 275/60R20 116S XL tires. These vehicles have a tire placcard that incorrectly states the recommended cold tire inflation pressure. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, "Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less."

Risk: If the operator inflates the tires according to the information on the tire placard, the tires may be underinflated, increasing the risk of tire failure which could result in a crash.

Manufacturer fix: SET will notify owners, and dealers will install a new tire placard with the correct cold tire inflation pressure information, free of charge. The recall began on June 29, 2015. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET15C.

Defect: Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2016 Toyota Camry and Highlander, 2015-2016 Toyota Tundra, Scion FR-S, and tC vehicles. The Load Carrying Capacity Modification Label may not reflect the correct added weight of the installed accessories. As a result, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims for Passenger Cars."

Risk: An incorrect label may lead an owner to overload the vehicle, increasing the risk of a crash.

Manufacturer fix: SET will notify owners, and provide a corrected label for placement over the inaccurate label, free of charge. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226.

Defect: Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Tundra CrewMax and Double Cab vehicles manufactured July 29, 2013, to August 22, 2014. Due to the possible misinstallation of the upper tab of the B-pillar interior trim, the Curtain-Shield Air Bags (CSA) may not deploy properly in the event of a crash.

Risk: If the Curtain-Shield Air Bags (CSA) do not deploy properly there is an increased risk of occupant injury during a crash.

Manufacturer fix: Toyota will notify owners, and dealers will inspect the B-pillar interior trim installation and will replace it if it is not installed correctly, free of charge. Owners may contact Toyota customer service at 1-800-331-4331.

Defect: Gulf States Toyota, Inc. (GST) is recalling certain model year 2013-2014 Toyota Tundra vehicles modified by GST as part of certain vehicle packages to be equipped with a combination of non-Toyota-brand 20-inch alloy wheels and chrome plated lug nuts. The coating on the lug nuts may give, causing the lug nuts to loosen or the wheel studs to fracture.

Risk: If the lug nuts loosen, or the wheel studs fracture, the wheel may separate from the vehicle, increasing the risk of a crash.

Manufacturer fix: GST will notify owners, and dealers will replace 20 lug nuts and torque them to specification, free of charge. The recall began in August 2014. Owners may contact GST customer service at 1-800-444-1074.

Defect: TOYOTA IS RECALLING CERTAIN MODEL YEAR 2011 TUNDRA VEHICLES EQUIPPED WITH A 3-JOINT TYPE PROPELLER SHAFT. DUE TO IMPROPER CASTING OF THE SLIP YOKES, THERE IS A POSSIBILITY THAT THE SLIP YOKE MAY BREAK, CAUSING THE PROPELLER SHAFT TO SEPARATE AT THE JOINT AND COME INTO CONTACT WITH THE ROAD SURFACE.

Risk: THE DRIVER COULD EXPERIENCE LOSS OF MOTIVE POWER AND VEHICLE CONTROL, INCREASING THE RISK OF A CRASH.

Manufacturer fix: TOYOTA WILL NOTIFY OWNERS AND INSPECT THE PROPELLER SHAFT AND, IF NECESSARY, REPLACE IT FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING MAY 2011. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.

Defect: GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2011 TUNDRA VEHICLES THAT HAVE AN INACCURATE LOAD CARRYING CAPACITY LABEL. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, “TIRE SELECTION AND RIMS.”

Risk: AN INACCURATE LABEL COULD LEAD TO VEHICLE OVERLOADING WHICH COULD RESULT IN TIRE FAILURE, INCREASING THE RISK OF A CRASH.

Manufacturer fix: GULF STATES TOYOTA WILL NOTIFY OWNERS AND WILL PROVIDE A CORRECTED LABEL FREE OF CHARGE. THE CUSTOMER WILL HAVE THE OPTION FOR DEALERS TO INSTALL THE LABEL FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 24, 2012. OWNERS MAY CONTACT GULF STATE TOYOTA AT 1-800-444-1074.

Defect: TOYOTA IS RECALLING CERTAIN MODEL YEAR 2010 TUNDRA VEHICLES WITH FOUR WHEEL DRIVE, THERE IS A POSSIBILITY THAT AN IMPROPER WELD EXISTS AT THE UNION OF THE PROPELLER SHAFT AND YOKE. DUE TO THIS IMPROPER WELD, THIS JOINT MAY SEPARATE AND THE SEPARATED SHAFT MAY COME INTO CONTACT WITH THE ROAD SURFACE.

Risk: THIS MAY RESULT IN A LOSS OF VEHICLE CONTROL INCREASING THE RISK OF A CRASH.

Manufacturer fix: DEALERS WILL REPLACE THE FRONT PROPELLER SHAFT FREE OR CHARGE. THE SAFETY RECALL BEGAN ON MARCH 19, 2010. OWNERS MAY CONTACT TOYOTA AT 1-800-331-4331.

Defect: GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2011 FJ CRUISER AND MODEL YEAR 2009-2011 TUNDRA VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 138, "TIRE PRESSURE MONITORING SYSTEMS." THE TPMS ON SOME VEHICLES MAY NOT HAVE BEEN PROPERLY CALIBRATED AND AS A RESULT THE LOW TIRE PRESSURE WARNING LAMP MAY NOT ILLUMINATE SHOULD THE INFLATION PRESSURE IN ONE OR MORE OF THE VEHICLE'S TIRES FALL BELOW THE THRESHOLD FOR WHEN THE LOW TIRE PRESSURE WARNING LAMP SHOULD ILLUMINATE.

Risk: DRIVERS WILL NOT RECEIVE A WARNING FROM THE TIRE PRESSURING MONITOR THAT ONE OR MORE TIRES ARE UNDERINFLATED INCREASING THE RISK THAT A VEHICLE WILL BE DRIVEN WITH ONE OR MORE UNDERINFLATED TIRES AND INCREASING THE RISK OF A TIRE FAILURE THAT MAY LEAD TO A CRASH.

Manufacturer fix: DEALERS WILL RECALIBRATE THE TIRE PRESSURE MONITORING SYSTEM IN ACCORDANCE WITH THE REGULATION FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING JUNE 2011. OWNERS MAY CONTACT GULF STATE TOYOTA CUSTOMER ASSISTANCE CENTER TOLL FREE AT 1-800-444-1074 MONDAY THROUGH THURSDAY, 8:30 AM TO 5:00 PM, OR FRIDAY 8:30 AM TO 4:00 PM CENTRAL STANDARD TIME.

Defect: SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2007-2011 TUNDRA VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 138, "TIRE PRESSURE MONITORING SYSTEMS." THE TPMS ON SOME VEHICLES MAY NOT HAVE BEEN PROPERLY CALIBRATED AND AS A RESULT THE LOW TIRE PRESSURE WARNING LAMP MAY NOT ILLUMINATE SHOULD THE INFLATION PRESSURE IN ONE OR MORE OF THE VEHICLE'S TIRES FALL BELOW THE THRESHOLD FOR WHEN THE LOW TIRE PRESSURE WARNING LAMP SHOULD ILLUMINATE.

Risk: DRIVERS WILL NOT RECEIVE A WARNING FROM THE TIRE PRESSURE MONITOR THAT ONE OR MORE TIRES ARE UNDERINFLATED, INCREASING THE RISK THAT THE VEHICLE WILL BE DRIVEN WITH ONE OR MORE UNDERINFLATED TIRES, INCREASING THE RISK OF A TIRE FAILURE THAT MAY LEAD TO A CRASH.

Manufacturer fix: DEALERS WILL RECALIBRATE THE TIRE PRESSURE MONITORING SYSTEM IN ACCORDANCE WITH THE REGULATION FREE OF CHARGE. THE SAFETY RECALL BEGAN DURING JULY 2011. OWNERS MAY CONTACT SOUTHEAST TOYOTA CUSTOMER ASSISTANCE CENTER TOLL FREE AT 1-800-301-6859, MONDAY THROUGH FRIDAY, 8:30 AM TO 5:00 PM, EASTERN STANDARD TIME.