Nissan Sentra

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2002-2006 Sentra vehicles whose passenger air bags were previously inspected and may have been released without replacing the Takata air bag inflator. In the event of a crash, Takata frontal passenger air bag inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Manufacturer fix: Owners are advised not to drive their vehicles until the repair has been completed. Nissan will notify owners, and dealers will re-inspect the vehicle and, if necessary, replace the air bag inflator, free of charge. The recall began January 22, 2021. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is PM964.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2026 Kicks and Sentra vehicles. The hook bracket of the front seat frames may be insufficiently welded, which can cause the front seat frames to become loose. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 207, "Seating Systems" and 210, "Seat Belt Assembly Anchorages."

Risk: A loose seat may not restrain the occupant as intended, increasing the risk of injury during a crash.

Manufacturer fix: Dealers will replace the front seat assemblies, free of charge. Owner notification letters were mailed May 18, 2026. Owners may contact Nissan's customer service at 800-647-7261. Nissan's number for this recall is PMA64. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 13, 2026.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2025 Sentra vehicles. The driver's seat frame may not be fully secured to the outer side of the seat track. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 207, "Seating Systems," and 210, "Seat Belt Assembly Anchorages."

Risk: An unsecured driver's seat may not adequately restrain the driver during a crash, increasing the risk of injury.

Manufacturer fix: Dealers will inspect and replace the driver's side lower seat frame assembly as necessary, free of charge. Owner notification letters were mailed May 1, 2025. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall is PMA45.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2025 Nissan Sentra vehicles. The front left-side driveshaft may not be fully seated in the continuously variable transmission (CVT) assembly, which can cause a transmission fluid leak and loss of drive power.

Risk: An unexpected loss of drive power can increase the risk of a crash. In addition, a driveshaft that is not fully engaged can result in a vehicle rollaway if the parking brake is not applied, increasing the risk of a crash or injury.

Manufacturer fix: Dealers will inspect the front left driveshaft, and if necessary, replace the driveshaft and CVT assembly, free of charge. Owner notification letters are expected to be mailed August 5, 2026. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is PMA68. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on June 30, 2026.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2025 Altima, Sentra, 2025-2026 Frontier, and 2026 Kicks vehicles. The door strikers may have been improperly welded and break, allowing the door to open while moving. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 206, "Door Locks and Door Retention Components."

Risk: A door that opens unexpectedly while the vehicle is in motion increases the risk of injury or a crash.

Manufacturer fix: Dealers will replace the door strikers, free of charge. Owner notification letters were mailed March 17, 2026. Owners may contact Nissan's customer service at 800-647-7261. Nissan's numbers for this recall are PD185 and PMA61. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 28, 2026.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2025 Sentra vehicles. The windshield glass may have visible air bubbles, which can obscure the driver's visibility. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 205, "Glazing Materials."

Risk: Reduced visibility while driving can increase the risk of a crash.

Manufacturer fix: Dealers will inspect and replace the windshield as necessary, free of charge. Owner notification letters were mailed January 21, 2026. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall is PMA58. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning November 21, 2025.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2024 Sentra vehicles. The front left-side driveshaft may not be fully seated in the continuously variable transmission (CVT) assembly, or may have a loose or missing retaining clip, which can cause a transmission fluid leak and loss of drive power.

Risk: An unexpected loss of drive power can increase the risk of a crash.

Manufacturer fix: Dealers will inspect the front left driveshaft, and if necessary, replace the driveshaft and CVT assembly, free of charge. Owner notification letters were mailed June 26, 2024. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is PMA37.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2024 Nissan Sentra vehicles. The windshield may have air bubbles on the front lower driver's side, which can obscure the Vehicle Identification Number (VIN). As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 205, "Glazing Materials."

Risk: An owner who cannot see their VIN clearly may not recognize their vehicle is involved in a safety recall, and may not have the recall remedy performed, which could increase the risk of injury, fire, or a crash.

Manufacturer fix: Dealers will inspect and replace the windshield as necessary, free of charge. Owner notification letters were mailed August 29, 2024. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is PMA38.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2024 Titan, Frontier, Infiniti QX60, Pathfinder, 2023-2024 Sentra, Versa, Kicks, Infiniti QX50, and 2023 Rogue vehicles. Due to a manufacturing issue, the driver's air bag inflator may absorb moisture, and cause the air bag to deploy improperly.

Risk: An air bag that deploys improperly may not protect the driver as intended during a crash, increasing the risk of injury.

Manufacturer fix: Dealers will replace the front driver's air bag assembly, free of charge. Owner notification letters were mailed April 10, 2024. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's numbers for this recall are PD103, PD104, and PMA34.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2022 Sentra vehicles. The driver's side cowl area may have a missing or improper seal, which can allow water to leak inside the vehicle and corrode electrical components.

Risk: Corrosion of the electrical components could result in failure of various electrical systems, such as loss of wiper motor function or exterior lighting, inoperative air bags, or the ability to shift into gear without applying the brake pedal. Any of these scenarios can increase the risk of a crash. In addition, an electrical short-circuit may occur, increasing the risk of a fire.

Manufacturer fix: Dealers will inspect and, if necessary, reseal the driver's side cowl. If moisture or corrosion is found, the main harness and engine room harness will be replaced. Repairs will be performed free of charge. Owner notification letters are expected to be mailed July 26, 2023. Owners may contact Nissan's customer service at 1-800-867-7669.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2019-2021 Altima and 2020-2021 Sentra vehicles. Damage to the camera harness can cause distortion or loss of the rearview camera display image. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: A rearview camera that does not properly display an image can reduce the driver's rear view, increasing the risk of a crash.

Manufacturer fix: Dealers will inspect the rearview camera and harness for damage and replace them as necessary. If no damage is found, the dealer will apply protective tape and reroute the rearview camera harness. Repairs will be performed free of charge. Owner notification letters are expected to be mailed October 19, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall is R23C3.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2020 Sentra vehicles, equipped with LED headlights. The right-hand headlight aim may be misaligned. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamp, Reflective Devices, and Associated Equipment."

Risk: An improperly aimed headlight may reduce the driver's visibility, increasing the risk of a crash.

Manufacturer fix: Dealers will replace the right-hand headlight, free of charge. Owner notification letters were mailed June 10, 2022. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is R20B4.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2020-2021 Sentra vehicles. The left and/or right tie rod may be bent.

Risk: A bent tie rod can break, causing a loss of steering control and increasing the risk of a crash.

Manufacturer fix: Dealers will inspect and replace the left and/or right tie rods as necessary, free of charge. Owner notification letters were mailed August 5, 2021. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is PM985.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2020-2022 Sentra vehicles. The left and/or right tie rod may bend.

Risk: A bent tie rod can break and cause a loss of steering control, increasing the risk of a crash.

Manufacturer fix: Owners are advised to contact their dealer for transport assistance if they are experiencing an off-center steering wheel or vibration. As an interim repair, dealers will inspect and replace any bent or broken tie rods, free of charge. Once newly designed parts are available, dealers will replace both left and right tie rods, free of charge. Owner letters were mailed November 27, 2024. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall is R23B3. This recall replaces and expands recall number 21V-461. Vehicles previously repaired under 21V-461 will need to have the new remedy completed.

Defect: Nissan North America, Inc. (Nissan) is recalling certain model year 2016 Sentra vehicles manufactured April 11, 2016, through April 26, 2016. The engine room harness may have a terminal pin too large to maintain a connection with the Engine Control Unit (ECU).

Risk: If the engine room harness loses connection to the ECU, the vehicle may not start or the engine may stall, increasing the risk of a crash.

Manufacturer fix: Nissan will notify owners, and dealers will replace the terminal pin on the engine room harness, free of charge. The recall began on August 15, 2016. Owners may contact Nissan customer service at 1-800-647-7261.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2015-2017 LEAF and 2014, 2016 and 2017 Sentra vehicles. Due to a manufacturing error within the air bag inflators, the passenger frontal air bag may not properly deploy in the event of a crash.

Risk: In the event of a crash, if the front passenger air bag doesn't deploy properly, it can increase the risk of injury to passengers.

Manufacturer fix: Nissan will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall began June 7, 2017. Owners may contact Nissan customer service at 1-800-647-7261.

Defect: Nissan North America, Inc. (Nissan) is recalling certain 2016-2019 Nissan Sentra vehicles. The brake light switch may become contaminated, preventing the circuit from closing and the brake lights from illuminating.

Risk: The brake lights may not illuminate, increasing the risk of a crash.

Manufacturer fix: Dealers will replace the brake light switch and install a protective grommet, free of charge. Owner notification letters were mailed July 1, 2022. Owners may contact Nissan customer service at 1-800867-7769. Nissan's number for this recall is PM971.

Defect: Nissan North America, Inc. (Nissan) is recalling certain model year 2015 Nissan Rogue vehicles manufactured June 9, 2015, to June 10, 2015, and 2015 Nissan Sentra and Versa Note vehicles manufactured June 5, 2015, to June 13, 2015. In the affected vehicles, the driver side front and rear doors may not fully latch. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, "Door Locks and Door Retention Components."

Risk: A door that does not fully latch may result in the door opening while the car is moving. The distraction may increase the risk of a crash and/or a vehicle occupant may fall out of the vehicle if they are not wearing a seatbelt, increasing their risk of injury.

Manufacturer fix: Nissan will notify owners, and dealers will inspect the date, lot number, and cavity code on the left front and rear door latches, and replace them, as necessary, free of charge. The recall began on August 31, 2015. Owners may contact Nissan customer service at 1-800-647-7261.

Defect: Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2016 Sentra vehicles manufactured June 4, 2012, to April 9, 2016. The front passenger seat belt bracket may become deformed if it is used to secure a Child Restraint System (CRS). The deformed seat bracket may cause the Occupant Classification System (OCS) to incorrectly classify the installed CRS, resulting in the front passenger air bag to not be turned off as designed when a CRS is in the seat.

Risk: If the frontal passenger air bag deploys in the event of a crash when a child seat is installed in the front passenger seat, there will be an increased risk of injury to the child in the CRS.

Manufacturer fix: Nissan will notify owners, and dealers will reinforce the seat belt bracket as well as reprogram the Air Bag Control Unit (ACU) and OCS Electronic Control Unit (ECU), free of charge. The recall began on June 13, 2016. Owners are warned not to install a CRS in the front seat. Owners may contact Nissan customer service at 1-800-867-7669.

Defect: Nissan is recalling certain model year 2013 Sentra vehicles manufactured from September 11, 2012, through October 4, 2012. Some fuel tank assemblies were not properly sealed during the manufacturing process. As a result, a small amount of gasoline may leak from the tank when it is full.

Risk: A gasoline leak in the presence of an ignition source may lead to a vehicle fire.

Manufacturer fix: Nissan will notify owners, and dealers will replace the fuel tanks as necessary, free of charge. The recall began on April 1, 2013. Owners may contact Nissan Customer Service at 1-800-647-7261.

Defect: NISSAN IS RECALLING CERTAIN MODEL YEAR 2010-2011 SENTRA VEHICLES EQUIPPED WITH MR20 ENGINES, MANUFACTURED FROM MAY 11, 2010, TO MAY 22, 2010, AND JULY 8, 2010, TO OCTOBER 25, 2010. THE ZINC COATING APPLIED TO THE TERMINAL STUD BOLT WAS THICKER THAN SPECIFICATION. THIS CAN RESULT IN A VOLTAGE DROP THAT MAY CAUSE DIFFICULTY STARTING THE VEHICLE AND COULD CAUSE DAMAGE TO THE ENGINE CONTROL MODULE (ECM).

Risk: THIS ISSUE CAN CAUSE THE ENGINE TO STALL WHILE THE VEHICLE IS IN MOTION AND IT MAY NOT BE POSSIBLE TO RESTART THE ENGINE AFTER IT STOPPED, INCREASING THE RISK OF A CRASH.

Manufacturer fix: NISSAN WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE POSITIVE BATTERY TERMINAL AND COVER, FREE OF CHARGE. THE RECALLBEGAN ON JANUARY 23, 2012. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.

Defect: NISSAN IS RECALLING CERTAIN MODEL YEAR 2010-2011 SENTRA VEHICLES, MANUFACTURED FROM MAY 22, 2010, THROUGH JULY 8, 2010. DUE TO A MACHINING IRREGULARITY, THE BOLT/WASHER SURFACE ON THE POSITIVE BATTERY TERMINAL CABLE END MAY ALLOW FOR A GAP TO OCCUR IN THE CONTACT AREA OF THE TERMINAL. THIS CAN RESULT IN A VOLTAGE DROP THAT MAY CAUSE DIFFICULTY STARTING THE VEHICLE AND COULD CAUSE DAMAGE TO THE ENGINE CONTROL MODULE.

Risk: THIS ISSUE CAN CAUSE THE ENGINE TO STOP RUNNING WHILE THE VEHICLE IS IN MOTION AT LOW SPEED WITH A DIFFICULT OR NO START INCREASING THE RISK OF A CRASH.

Manufacturer fix: DEALERS WILL REPLACE THE POSITIVE BATTERY TERMINAL CABLE END WITH A NEW ONE FREE OF CHARGE. THE SAFETY RECALL BEGAN PN NOVEMBER 29, 2010. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.

Defect: NISSAN IS RECALLING CERTAIN MODEL YEAR 2008 SENTRA PASSENGER VEHICLES EQUIPPED WITH BOSCH MASTER CYLINDERS. BRAKE FLUID MAY LEAK FROM THE MASTER CYLINDER. IF THE AMOUNT OF BRAKE FLUID IN THE MASTER CYLINDER RESERVOIR DECREASES TO BELOW THE MINIMUM LEVEL, THE BRAKE SYSTEM WARNING INDICATOR WILL ILLUMINATE AS DESIGNED AND THE BRAKES WILL NOT FUNCTION PROPERLY.

Risk: IF THE WARNING LAMP IS CONTINUOUSLY IGNORED, ONE OF THE BRAKE CIRCUITS ON THE VEHICLE MAY FAIL INCREASING STOPPING DISTANCES AND INCREASING THE RISK OF A CRASH.

Manufacturer fix: DEALERS WILL INSPECT AND REPLACE THE MASTER CYLINDER BRAKE BOOSTER ASSEMBLY FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 14, 2009. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.

Defect: NISSAN IS RECALLING 169,202 MY 2007-2008 SENTRA PASSENGER VEHICLES EQUIPPED ROBERT BOSCH MASTER CYLINDER. DUE TO THE MACHINING IRREGULARITY BY THE SUPPLIER, THE INTERNAL SEAL GROOVE IN THE BODY OF SOME BRAKE MASTER CYLINDERS MAY ALLOW FOR A GAP IN THE GROOVE CONTACT AREA OF THE SEAL. THIS MAY RESULT IN BRAKE FLUID SLOWLY LEAKING FROM THE MASTER CYLINDER INTO THE BRAKE BOOSTER ASSEMBLY, CAUSING THE BRAKE WARNING LIGHT TO ILLUMINATE.

Risk: IF THE WARNING LAMP IS IGNORED, ONE OF THE BRAKE CIRCUITS ON THE VEHICLE MAY NOT OPERATE AS DESIGNED INCREASING THE RISK OF A CRASH.

Manufacturer fix: DEALERS WILL INSPECT THE MASTER CYLINDER/BRAKE BOOSTER ASSEMBLY AND IF BRAKE FLUID LEAKAGE IS DETECTED, THE MASTER CYLINDER WILL BE REPLACED WITH A NEW ONE FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 20, 2008. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.

Defect: ON CERTAIN PASSENGER VEHICLES, A VAPOR HOSE LOCATED IN THE FUEL TANK MAY NOT HAVE BEEN FORMED CORRECTLY DURING THE MANUFACTURING PROCESS. WHEN THE VEHICLE IS PARKED WITH A FULL FUEL TANK, FUEL MAY FLOW INTO THE VAPOR HOSE, WHICH IS CONNECTED TO A VAPOR CANISTER.

Risk: THE VAPOR CANISTER COULD BECOME FULL, AND EXCESS FUEL COULD SPILL OUT ONTO THE GROUND. FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.

Manufacturer fix: DEALERS WILL CHECK THE VAPOR HOSE CONNECTIONS IN THE FUEL TANK TO DETERMINE IF A POOR SEAL EXISTS. IF A POOR SEAL IS IDENTIFIED, A NEW FUEL TANK WILL BE INSTALLED FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 15, 2005. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.

Defect: ON SOME PASSENGER VEHICLES EQUIPPED WITH A NISSAN-APPROVED ACCESSORY FLOOR MAT THAT WAS INSTALLED EITHER AT THE ASSEMBLY PLANT OR BY THE DEALER, DUE TO THE LENGTH OF THE DRIVER SIDE FLOOR MAT, A SMALL AMOUNT OF MAT MOVEMENT COULD CAUSE THE MAT TO INTERFERE WITH THE ACCELERATOR PEDAL AND NOT ALLOW THE PEDAL TO RELEASE AFTER IT IS DEPRESSED.

Risk: IF THIS OCCURS UNEXPECTEDLY, IT COULD LEAD TO A CRASH.

Manufacturer fix: DEALERS WILL INSPECT THE DRIVER SIDE FLOOR MAT AND IF IT IS A NISSAN FLOOR MAT SUBJECT TO THIS RECALL, THE DEALER WILL REPLACE BOTH THE DRIVER AND PASSENGER SIDE FLOOR MATS. OWNER NOTIFICATION BEGAN MARCH 18, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261.

Defect: VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE VEHICLES WERE MISSING TAMPERPROOF CAPS THAT PREVENT HORIZONTAL HEADLAMP ADJUSTMENT.

Risk: THESE CAPS ARE INSTALLED TO PREVENT MISADJUSTMENT OF THE HEADLAMPS.

Manufacturer fix: DEALERS WILL INSTALL A TAMPERPROOF CAP OVER THE HORIZONTAL ADJUSTMENT SCREW FOR BOTH HEADLAMPS. OWNER NOTIFICATION BEGAN JANUARY 14, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261.

Defect: ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH THE QG18DE ENGINE OR QR25DE ENGINES, THE FOAM MATERIAL USED FOR THE INTERIOR LINING OF THE ELECTRONIC CONTROL MODULE (ECM) BOX EMITS SULFUR AS IT CURES.

Risk: IF ONE OF THE RESISTORS INSIDE THE ECM HAS A CRACK ON THE SURFACE COATING, THE GAS MAY CAUSE CORROSION OF THE RESISTOR. THIS COULD CAUSE THE MALFUNCTION INDICATOR LIGHT TO COME ON, POOR DRIVABILITY (IDLE INSTABILITY, POOR ACCELERATOR), OR THE ENGINE TO STOP RUNNING DURING VEHICLE OPERATION, WHICH COULD RESULT IN A CRASH.

Manufacturer fix: DEALERS WILL REMOVE THE INSIDE LINING MATERIAL FROM THE ECM BOX. OWNER NOTIFICATION BEGAN ON DECEMBER 22, 2003. OWNERS SHOULD CONTACT NISSAN AT 1-800-647-7261.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH A 1.8 LITER ENGINE. THE ENGINE COULD STOP RUNNING WHILE BEING DRIVEN DUE TO A DEFECTIVE CRANK POSITION SENSOR. THIS COULD ALSO RESULT IN THE "SERVICE ENGINE SOON" WARNING LIGHT COMING ON OR REDUCED ENGINE POWER.

Risk: IF THE ENGINE STOPS RUNNING WHILE THE VEHICLE IS IN MOTION, IT COULD RESULT IN A CRASH.

Manufacturer fix: DEALERS WILL REPLACE THE CRANK POSITION SENSORS. OWNER NOTIFICATION BEGAN DECEMBER 10, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261.

Defect: ON CERTAIN ELECTRIC VEHICLES, THE FRONT SUSPENSION TRANSVERSE LINK'S BALL JOINT BRACKET MAY BREAK FROM STRESS CONCENTRATION AT A NOTCH CREATED BY SURFACE ROUGHNESS AND THE SHAPE OF THE MATERIAL CUT-LINE.

Manufacturer fix: DEALERS WILL REPLACE THE BRACKET ON THESE VEHICLES. OWNER NOTIFICATION BEGAN DECEMBER 15, 2003. OWNERS SHOULD CONTACT NISSAN AT 1-800-647-7261.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. ONE OR MORE OF THE THREE BOLTS USED TO ATTACH EACH FRONT SUSPENSION LOWER CONTROL ARM TO THE BODY ON THE LEFT AND RIGHT SIDES MAY NOT HAVE BEEN PROPERLY MANUFACTURED.

Risk: THE BOLTS COULD FRACTURE, INCREASING THE RISK OF A CRASH.

Manufacturer fix: DEALERS WILL REPLACE THE LOWER CONTROL ARM ATTACHMENT BOLTS. OWNER NOTIFICATION BEGAN JUNE 30, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261.

Defect: ON CERTAIN PASSENGER VEHICLES, THE CIRCUIT BOARD FOR THE CRANK POSITION SENSOR OR CAM POSITION SENSOR MAY HAVE AN IMPROPER SOLDER JOINT DUE TO SOLDER DEFORMATION CAUSED BY HEAT STRESS ACCELERATED BY THE EXISTENCE OF FLUX RESIDUE DURING THE SOLDERING PROCESS.

Risk: THIS COULD CAUSE THE "SERVICE ENGINE SOON" WARNING LIGHT TO COME ON, CREATE A NO START CONDITION, CAUSE REDUCED ENGINE POWER, OR CAUSE THE ENGINE TO STOP RUNNING WITHOUT WARNING DURING VEHICLE OPERATION, WHICH COULD RESULT IN A CRASH.

Manufacturer fix: DEALERS WILL REPLACE THE CRANK POSITION SENSORS. CAMSHAFT POSITION SENSOR(S), AND IN SOME CASES, THE VARIABLE TIMING CONTROL SENSOR(S). VEHICLES INVOLVED IN A PREVIOUS RECALL CAMPAIGN, 01V357, ARE ALSO INCLUDED IN THIS NEW CAMPAIGN. THE REPLACEMENT SENSORS USED IN THAT CAMPAIGN ARE ALSO AFFECTED. OWNER NOTIFICATION BEGAN ON DECEMBER 22, 2003. OWNERS SHOULD CONTACT NISSAN AT 1-800-647-7261 OR INFINITI AT 1-800-662-6200.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE COOLING HOLES IN THE STEEL WHEEL MAY HAVE BURRS ON THEIR EDGES AS A RESULT OF IMPROPER MANUFACTURING. THESE BURRS CAN CAUSE CRACKS AS THE VEHICLE IS BEING DRIVEN. CRACKS CAN PROPAGATE BETWEEN ADJACENT COOLING HOLES. IF ENOUGH CRACKS DEVELOP BETWEEN THE COOLING HOLES, THE WHEEL COULD FAIL AND SEPARATE FROM THE MOUNTING HUB WITHOUT PRIOR WARNING.

Risk: SEPARATION OF THE WHEEL FROM THE VEHICLE WHILE BEING OPERATED COULD RESULT IN A VEHICLE CRASH.

Manufacturer fix: DEALERS WILL INSPECT FOR CRACKS AND REPLACE THE WHEEL IF CRACKS ARE DISCOVERED. OWNER NOTIFICATION WILL BE CONDUCTED IN TWO PHASES. THE FIRST MAILING BEGAN OCTOBER 1, 2001, ASKING OWNERS TO BRING THEIR VEHICLES IN TO A DEALER FOR INSPECTION OF THE WHEELS. ANY WHEELS WITH CRACKS WILL BE REPLACED. A SECOND OWNER NOTIFICATION WILL BEGIN IN EARLY DECEMBER, AT WHICH TIME NISSAN WILL HAVE AN ADEQUATE NUMBER OF REPLACEMENT WHEELS, REQUESTING OWNERS TO RETURN TO THEIR DEALERS TO HAVE THE WHEELS REPLACED. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. WATER CAN ENTER AND DISPLACE THE GREASE IN THE WIPER ARM LINKAGE BALL JOINT WHERE THE WIPER LINKAGE ATTACHES TO THE WIPER MOTOR LINKAGE.

Risk: THIS CAN RESULT IN GRADUAL WEAR OVER A PERIOD OF TIME INSIDE THE JOINT THAT COULD LEAD TO THE SEPARATION OF THE WIPER LINKAGE ASSEMBLY FROM THE WIPER MOTOR LINKAGE AT THE BALL JOINT. A LOSS OF WINDSHIELD WIPER FUNCTION CAN RESULT IN THIS SEPARATION OCCURS.

Manufacturer fix: TO PREVENT GREASE FROM BEING WASHED OUT OF THE JOINT, THE DEALERS WILL MODIFY BY ADDING A WATER DIVERSION SEAL THAT WILL PREVENT WATER FROM ENTERING THE WINDSHIELD WIPER LINKAGE BALL JOINT AREA.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. ONE OF THREE STYROFOAM PADS LOCATED IN EACH REAR DOOR AS PART OF THE DESIGN FOR ENSURING COMPLIANCE WITH FMVSS NO. 214, "SIDE DOOR STRENGTH," WAS NOT INSTALLED.

Risk: IN THE EVENT OF A VEHICLE CRASH, AN OCCUPANT WOULD NOT BE PROPERLY PROTECTED INCREASING THE RISK OF PERSONAL INJURY.

Manufacturer fix: DEALERS WILL INSTALL THE MISSING PAD IN EACH REAR DOOR.

Defect: THESE VEHICLES DO NOT MEET THE ILLUMINATION REQUIREMENTS OF FMVSS NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

Risk: FOLLOWING VEHICLES MAY NOT BE AWARE THAT THE VEHICLE IN FRONT IS STOPPING, INCREASING THE RISK OF A VEHICLE CRASH.

Manufacturer fix: OWNERS WILL BE PROVIDED WITH TWO NEW LIGHT BULBS FOR THE STOP/TAIL LAMPS WHICH ARE BRIGHTER THAN THE ORIGINAL BULBS. A LABEL WITH THE NEW BULB NUMBER WILL ALSO BE PROVIDED FOR INSERTION INTO THE OWNER'S MANUAL. IF AN OWNER SO DESIRES, A DEALERS CAN INSTALL THE LIGHT BULBS FOR THEM.

Defect: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FRONT COIL SPRINGS MAY NOT HAVE SUFFICIENT CORROSION RESISTANCE IN AREAS OF THE COUNTRY WHERE SIGNIFICANT AMOUNTS OF DE-ICING SALTS ARE APPLIED TO ROADS IN THE WINTER.

Risk: IF A BROKEN SPRING COMES OUT OF THE LOWER SEAT, IT COULD CONTACT AND PUNCTURE THE TIRE.

Manufacturer fix: DEALERS WILL REPLACE THE FRONT COIL SPRING.

Defect: THE ANTI-LOCK BRAKING SYSTEM (ABS) HYDRAULIC ACTUATOR WAS NOT PROPERLY PURGED OF ALL AIR DURING THE FILL AND EVACUATION PROCESS CAUSING AIR BUBBLES TO GET INTO THE BRAKE SYSTEM.

Risk: THIS CONDITION CAN CAUSE INCREASED BRAKE PEDAL TRAVEL AND STOPPING DISTANCES.

Manufacturer fix: DEALERS WILL BLEED THE ABS HYDRAULIC ACTUATOR TO REMOVE ANY AIR BUBBLES IN THE BRAKE SYSTEM.

Defect: IMPROPER BELT GUIDE PERFORMANCE CAN CAUSE FRAYING OF THE SHOULDER SAFETY BELTS NEAR THE RETRACTOR.

Risk: THE FRAYING OF THE SHOULDER SAFETY BELT WEBBING CAN CAUSEIMPROPER RETRACTION OF THE BELT, WHICH WOULD LEAD TO INADEQUATE PROTECTION OFSEAT OCCUPANT DURING A SUDDEN STOP OR ACCIDENT, AND COULD RESULT IN INCREASEDRISK OF INJURY.

Manufacturer fix: MODIFY THE SAFETY BELT GUIDES TO PREVENT FRAYING; AND OR REPLACE RETRACTOR ASSEMBLY IF FRAYING IS PRESENT.

Defect: THE WIPER BLADE MAY EXTEND TOO FAR AND CATCH ON THE RADIO ANTENNA BRACKET. THE CONNECTION OF THE WIPER ARM AND THE PIVOT COULD BE DAMAGED. THE CONDITION IS CAUSED BY AN INCORRECT SETTING OF THE WIPER ARM HEIGHT ABOVE THE PIVOT.

Manufacturer fix: DEALER WILL INSPECT AND, IF NECESSARY, THE WIPER ARM PIVOT WILL BE REPLACED AND THE WIPER STROKE ADJUSTED.