BMW 530I

Defect: BMW of North America, LLC (BMW) is recalling certain 2025 530i and 540i xDrive vehicles. The air bag control unit may have been manufactured incorrectly, which can result in the air bags not deploying as intended.

Risk: Air bags that do not deploy as intended during a crash increases the risk of injury.

Manufacturer fix: Dealers will replace the air bag control unit, free of charge. The vehicles have not been sold from dealer inventory and therefore no owner letters will be mailed. Owners may contact BMW customer service at 1-800-525-7417.

Defect: BMW of North America, LLC (BMW) is recalling certain 2020-2021 530i xDrive, 540i xDrive and 2021 740Li xDrive vehicles. The output shafts (left/right) which transfer power from the driveshaft to the rear wheels may break due to a heat treatment error during supplier production.

Risk: A broken output shaft can lead to a loss of drive power or a rollaway condition in a parked vehicle (if the parking brake is not engaged), increasing the risk of a crash.

Manufacturer fix: BMW will notify owners, and dealers will replace the output shaft(s), free of charge. The recall began March 24, 2021. Owners may contact BMW customer service at 1-800-525-7417.

Defect: BMW of North America, LLC (BMW) is recalling certain 2020-2021 X3 sDrive 30i, X3 xDrive 30i, X3M 40i, X3 xDrive 30e, X4 xDrive 30i, X4M 40i, 530i, 540i, 540i xDrive, M550i xDrive, M5, 550e, 550e xDrive, and 550e iPerformance vehicles. A small portion of the rearview image may be slightly obscured. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: If the driver relies on only the rearview camera image, the reduced rearview image view can increase the risk of a crash or injury.

Manufacturer fix: BMW will notify owners, and dealers will inspect and, if necessary, program the rearview camera with updated software. The recall began November 18, 2020. Owners may contact BMW customer service at 1-800-525-7417.

Defect: VEHICLE DESCRIPTION: DURING THE TIRE MOUNTING PROCESS ON CERTAIN PASSENGER VEHICLES BUILT WITH STANDARD (NON-SPORT) SUSPENSION AND EQUIPPED WITH CONTINENTAL CONTITOURINGCONTACT CH95 ECOPLUS TIRES, SIZE 225/65R16 95H, HAVING DOT CODES 4001, 4101, OR 4201, THE OUTER SIDEWALL SURFACE OF THE TIRES MAY HAVE BEEN CUT BY A SHARP EDGE. OPERATION OF THE VEHICLE OVER A LONG PERIOD OF TIME COULD LEAD TO A REDUCTION OF INFLATION PRESSURE.

Risk: CONTINUED DRIVING WITH LOW INFLATION PRESSURE IN THE TIRE COULD ULTIMATELY RESULT IN DAMAGE TO THE TIRE, AFFECT VEHICLE HANDLING AND CONTROL, AND COULD IN SOME CASES RESULT IN A VEHICLE CRASH.

Manufacturer fix: DEALERS WILL INSPECT ALL FIVE TIRES FOR A POSSIBLE CUT IN THE SIDEWALL, AND IF A CUT IS FOUND, THE TIRE WILL BE REPLACED. OWNER NOTIFICATION BEGAN DECEMBER 10, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.